Home » Barcode & RFID Data Capture Devices » LF6850

LF6850 Android Wearable Computer

A 70 g Android 13 computer you wear on the wrist, finger or back of the hand. It pairs a 2.1-inch AMOLED touchscreen with a professional 1D/2D scan engine and a 13 MP camera, so picking, sorting and inspection tasks are completed on the device instead of on a separate mobile computer plus ring scanner.

  • Operating systemAndroid 13
  • Display2.1 in, 410 × 502 AMOLED, 700 nits
  • Weight70 g
  • Sealing & dropIP67, 1.8 m
  • WirelessWi-Fi 6 (2×2 MU-MIMO), Bluetooth 5.3

What the LF6850 is

The LF6850 is an enterprise Android computer worn on the body rather than carried in a hand. It runs Android 13 on an octa-core 2.0 GHz platform with 4 GB of RAM and 64 GB of storage, and presents a tailored watch interface on a 2.1-inch AMOLED panel. Because the display is emissive, it needs no backlight: it stays readable in bright aisles while drawing less power than a conventional handheld screen, which is what keeps a single 1150 mAh battery working across a shift.

In practice this removes the usual two-device setup on the warehouse floor. Instead of carrying a mobile computer and pairing a separate ring scanner, the operator completes the whole task — see the next pick, scan it, confirm it, capture an image if something is damaged — on the device that is already on the hand. Scanning can also be triggered by the motion and proximity sensors, so high-volume picking and sortation need fewer deliberate actions.

Key features

Compact, mighty, all-in-one host

Octa-core 2.0 GHz with Android 13 and a tailored Watch UI — strong computing in a device that weighs 70 g.

2.1-inch AMOLED touchscreen

410 × 502, 700 nits. No backlight, lower power draw, and full interaction with apps directly on the device.

Reliable connectivity

Wi-Fi 6 with 2×2 MU-MIMO and Bluetooth 5.3, tuned antenna design for consistent performance in any wearing mode.

Adaptable wearability

Wrist strap, glove, finger ring, back-of-hand and neck-strap configurations, with left- and right-hand support.

Intelligent data capture

Standard-range 1D/2D scan engine with an optional FlexRange engine, plus motion and proximity triggered scanning and a 13 MP PDAF camera for damage verification.

Simplified provisioning and login

In-display NFC for tap-to-log-in, rapid pairing and staging — useful where devices are shared across shifts.

Programmable button

One tactile key can be mapped to push-to-talk or a quick app launch, alongside four tactile triggers in total.

Built for extreme conditions

IP67 sealing and 1.8 m drop resistance per MIL-STD 810H, plus 1000 tumbles at 0.5 m without a rugged boot.

Paired over Bluetooth with AR glasses or a headset, the LF6850 can also deliver real-time visual and voice guidance, so operators keep their attention ahead instead of checking a screen.

Full specifications

Performance characteristics
CPU Octa-core 2.0 GHz
AnTuTu score 308,016 (V11)
Operating system Android 13
Memory 4 GB RAM + 64 GB ROM
Physical characteristics
Dimensions 60 mm L × 58 mm W × 14 mm D
Weight 70 g
Display 2.1 inches, 410 × 502, AMOLED, 700 nits
Touch panel Multi-mode capacitive touch with bare or gloved fingertip input or stylus (sold separately); Corning Gorilla Glass; water droplet rejection; fingerprint resistant anti-smudge coating
Power Non-removable battery, standard capacity 3.85 V 1150 mAh / 4.43 Wh; smart battery management
Interface / I/O Bottom: 5-pin charging connector & communication I/O; rear: 2-pin communication I/O
Notification Audible tone; vibration; LED
Keypad & buttons On-screen keypad and Enterprise Keyboard; power button; functional button; dual-action side scan buttons
Voice & audio One microphone; high-quality single speaker; Bluetooth wireless headset support, SWB & FB audio
PTT hot key Supported through the functional button
Wireless LAN
Radio IEEE 802.11 a/b/g/n/ac/d/h/i/r/k/v/w/mc/ax; 2×2 MU-MIMO; Wi-Fi 6 (802.11ax); IPv4, IPv6
Data rates 5 GHz: 802.11a/n/ac/ax — 20/40/80 MHz, up to 400 Mbps. 2.4 GHz: 802.11b/g/n/ax — 20/40 MHz, up to 286.8 Mbps
Security & encryption WEP (40 or 104 bit); WPA/WPA2 Personal (TKIP and AES); WPA3 Personal (SAE); WPA/WPA2 Enterprise (TKIP and AES); WPA3 Enterprise (AES); EAP-TTLS (PAP, MSCHAP, MSCHAPv2), EAP-TLS, PEAPv0-MSCHAPv2, PEAPv1-EAP-GTC, LEAP, EAP-PWD; WPA3 Enterprise 192-bit mode (GCMP-256)-EAP-TLS; Enhanced Open (OWE); WPA3-FT; SCV (server certificate validation)
Wireless PAN Bluetooth configurable Class 1 and 2, Bluetooth v5.3; classic Bluetooth (BR/EDR) and Bluetooth LE
Data capture
Scanning Standard-range 1D/2D scan engine; FlexRange 1D/2D scan engine (optional); presentation mode (optional)
Camera Top-mounted 13 MP autofocus; flash LED; PDAF; torch mode
NFC ISO 14443 Type A; Sony FeliCa and ISO 15693 cards; card emulation via host; MIFARE 1K/4K; MIFARE DESFire; ISO/IEC 18092 (Type F); host card emulation; peer-to-peer
Sensors & user environment
Sensors Ambient light; accelerometer + geomagnetic + gyro + proximity (optional)
Operating temperature −20 °C to 50 °C / −4 °F to 122 °F
Storage temperature −40 °C to 70 °C / −40 °F to 158 °F
Humidity 5% to 95% non-condensing
Drop specification 1.8 m / 5.9 ft drops to tile over concrete across the operating temperature range, per MIL-STD 810H
Tumble specification 1000 × 1.6 ft / 0.5 m tumbles at room temperature without a rugged boot
Sealing IP67
Vibration 12.2 g PK sine (10–55 Hz); 2.0 mm double amplitude (constant displacement); 60 minutes per axis, 3 axes
Thermal shock −40 °C to 70 °C, 12 cycles (1 cycle = 1 hour at −40 °C and 1 hour at 70 °C), 2-hour recovery at room temperature before inspection
Electrostatic discharge ±15 kV DC air discharge; ±8 kV DC direct discharge; ±8 kV DC indirect discharge
Software solutions & accessories
Enterprise management Unified Management System (UMS), UStage provisioning, UTalk 2.0 PTT platform, OTA / firmware update management
Device productivity ScanWedge, U-Browser, Enterprise Launcher
Diagnostics & maintenance Log Capture, WiFi Diagnostics, Smart Battery Management
Accessories Charging cradle (1 device); 4-slot charging cradle (4 devices); watch band; ring trigger; neck strap; back-of-hand mount; scan grip; 10 W (5 V/2 A) wall adapter + USB 2.0 Type C cable

Where it is used

The LF6850 suits tasks where the operator’s hands are already busy and the next action must be seen without stopping work.

Frequently asked questions

Is the LF6850 a scanner or a computer?

Both. It is an Android 13 computer on an octa-core 2.0 GHz platform with 4 GB RAM and 64 GB storage, and it carries a professional standard-range 1D/2D scan engine. An optional FlexRange 1D/2D engine and a presentation mode are also available, and a 13 MP autofocus camera handles image capture.

How is it worn, and can it be used with either hand?

It supports wrist strap, glove, finger ring, back-of-hand and neck-strap configurations, with left- and right-hand wear. Four tactile triggers, including a programmable shortcut key, are provided for hands-free operation.

Does the touchscreen work with gloves?

Yes. The multi-mode capacitive panel accepts bare or gloved fingertip input as well as a stylus (sold separately), and it carries a fingerprint-resistant anti-smudge coating with water droplet rejection.

How rugged is it in a real warehouse?

IP67 sealing, 1.8 m drops to tile over concrete across the operating temperature range (−20 °C to 50 °C) per MIL-STD 810H, and 1000 tumbles at 0.5 m at room temperature without a rugged boot. Vibration, thermal shock and ESD figures are listed in the specification tables above.

How do shared devices handle logins and staging?

In-display NFC supports tap-to-log-in authentication, rapid device pairing and streamlined staging, which suits multi-shift environments. the device-management suite (UMS) provides central fleet management, application whitelisting and blacklisting, permissions, remote data wipe and battery lifecycle management, and U-Stage provisions devices from a staging file by remote deployment, local import or QR code.

What has to be ordered alongside the device?

The mounting accessory depends on how it is worn — watch band, ring trigger, neck strap, back-of-hand mount or scan grip — and charging can be done in a single-device cradle or a 4-slot cradle. A 10 W (5 V/2 A) wall adapter with a USB 2.0 Type-C cable is also available.

Planning a wearable deployment? Tell us how your picking, sortation or retail workflow runs and we will confirm the LF6850 configuration, the wearing accessory and the scanner option that fits it.

Get a Quote

Specifications are the figures published in the LF6850 product specification sheet (update date 2026-04-23) and are subject to change without prior notice. Accessories listed as optional are not part of the standard configuration.

Contact Us

For general inquiries, please fill out the form below and we will have someone from our team contact you as soon as possible.