Home » Industrial Identification & Printing Systems » Double-Sided Barcode Printer

Double-Sided Barcode Printer

Clear Print · Durable Quality · Wide Applications

  • Printing methodThermal transfer
  • Print resolution (dpi)300 / 600
  • Maximum print speed (mm/s)150 / 100
  • Maximum print width (mm)105.7 / 54.1

Product Introduction

This is an industrial-grade barcode printer designed for double-sided printing. Equipped with two independent print heads, it can print on both the front and back of a label simultaneously, producing double-sided content in a single pass. The device uses thermal transfer printing, with a print resolution of 300 dpi or 600 dpi and a maximum print width of 105.7 mm and 54.1 mm respectively.

The two print heads can be individually temperature-adjusted, and the resolutions of the two heads are not interchangeable. When printing only on the front of the label, print head 2 can be used alone; in this case print head 1 lifts automatically and the ribbon stops via an electromagnetic brake. Conversely, when printing only on the back of the label, the ribbon-saving device likewise stops the ribbon and lifts the print head, avoiding ribbon waste.

The label guide clamp keeps printing accurate by centering the media in the output direction, and is especially suited to narrow continuous materials; the label width can be adjusted with a knob. A separator integrated into the base mechanism smoothly separates continuous labels from the ribbon and improves feed precision. Without backfeeding, the printer maintains continuous print content during cutting or perforation cutting, allowing multiple print jobs to run without wasting labels.

Widely used in:

  • Double-sided label printing
  • Wire marking and heat shrink tubing
  • Fabric labels and laundry labels
  • Hang tags and paper cards
  • Logistics and warehousing barcode labels
  • Traceability marking for electronic and automotive parts

Product Features

Double-Sided Printing Capability

  • Two independent print heads, supporting simultaneous front and back printing
  • Print head 2 can be used alone when printing on the top of the label; print head 1 lifts automatically
  • Ribbon-saving device: the ribbon stops when printing only on the bottom of the label, reducing consumable waste
  • Backfeed-free continuous printing; cutting and perforation cutting do not interrupt print content

Print Quality

  • Printing method: thermal transfer
  • Print resolution: 300 dpi / 600 dpi (not interchangeable)
  • Maximum print speed: 150 mm/s (300 dpi) / 100 mm/s (600 dpi)
  • Maximum print width: 105.7 mm (300 dpi) / 54.1 mm (600 dpi)
  • Each print head can be individually temperature-adjusted for stable, clear output

Media Compatibility and Accessories

  • Prints roll-fed and fan-fold labels; supports continuous and pre-cut heat shrink tubing
  • Can be combined with a cutter and a perforation cutter
  • Optional print roller for narrow labels and heat shrink tubing
  • Label guide clamp centered in the output direction for accurate printing

Standard Colors / Materials

  • Roll-fed and fan-fold labels
  • Continuous and pre-cut heat shrink tubing
  • Fabric labels
  • Hang tags and paper cards
  • Other materials can be tested and customized on request

Operation and Maintenance

  • LCD color touchscreen (4.3 inch, 272 x 480 pixels)
  • Automatic print head detection at power-on
  • Ribbon low warning; the status bar displays various operating information

Recommended Printing Materials

Item Description
Recommended material Continuous heat shrink tubing (flat, width 4 – 85 mm)
Matching roller Print roller (for heat shrink tubing, optional)
Matching cutters Cutter / perforation cutter
Maximum material thickness 1.1 mm

Specifications

This printer series offers three configurations: with a tear-off plate, with a cutter, and with a perforation cutter, each available in 300 dpi and 600 dpi.

For models with a cutter or a perforation cutter, the maximum paper length that the cut-off collection tray can hold is 100 mm.

Physical Specifications

Property Parameter
Output direction Centered
Printing method Thermal transfer
Print resolution (dpi) 300 / 600
Maximum print speed (mm/s) 150 / 100
Maximum print width (mm) 105.7 / 54.1
Ribbon-saving device Standard
Printer dimensions (W x H x D, mm) 248 x 395 x 594
Weight (kg) 21

Label and Consumable Specifications

Property Requirement
Label width (mm) 10 – 110
Minimum label height (mm) 20
Maximum label thickness (mm) 0.1
Label liner width (mm) 14 – 114
Label liner thickness (mm) 0.03 – 0.16
Continuous paper width (mm) 4 – 114
Continuous paper thickness (mm) 0.03 – 0.5
Maximum heat shrink tubing width (pre-cut, mm) 114
Heat shrink tubing width (continuous, flat, mm) 4 – 85
Maximum heat shrink tubing thickness (mm) 1.1
Maximum roll outer diameter (mm) 300
Core diameter (mm) 38.1 – 76
Wind direction Outward or inward
Ribbon Specification Requirement
Ink side Outward or inward
Maximum ribbon diameter (mm) 80
Core diameter (mm) 25.4
Maximum ribbon length (m) 450
Maximum ribbon width (mm) 114

Electrical and Interfaces

Property Requirement
RS232C serial port 1,200 to 230,400 Baud / 8 Bit
USB 2.0 High-speed device, PC dedicated port
Ethernet 10/100 Mbit/s, LPD, RawIP-Printing, SOAP-Webservice, OPC UA, WebDAV
Network protocols DHCP, HTTP/HTTPS, FTP/FTPS, TIME, NTP, Zeroconf, SNMP, SMTP, VNC
Control panel USB Host For service USB drive, USB drive, USB wireless adapter, USB Bluetooth adapter
Rear USB Host For keyboard, barcode scanner, USB drive, USB wireless adapter, USB Bluetooth adapter, external control panel
Operating voltage 100 – 240 VAC, 50/60 Hz, PFC
Power consumption Standby <15 W / normal operation 100 W / maximum 200 W
Safety certifications CE, FCC Class A, ICES-3, cULus, CB

Operating Environment and Control Panel

Property Requirement
Operating temperature / humidity +5 – 40 C / 10 – 85 %, non-condensing
Storage temperature / humidity 0 – 60 C / 20 – 85 %, non-condensing
Transport temperature / humidity -25 – 60 C / 20 – 85 %, non-condensing
Screen type LCD color touchscreen
Screen size (inch) 4.3
Resolution (W x H, pixels) 272 x 480

Print Rollers and Cutters

Model Maximum applicable label width (mm)
DR4-M30 30
DR4-M60 60
DR4-M80 80
DRS4-M35 35
DRS4-M50 50
DR4 (standard print roller) 120
DRS4 (standard print roller) 120

DR4 uses a standard synthetic rubber coating for high printing accuracy; DRS4 is an optional silicone coating especially suited to fabric labels, with an extremely long service life. Narrow labels and ribbons require a dedicated print roller to achieve accurate printing.

Cutter Model Max. paper width mm Max. gap mm Max. thickness mm Min. cutting length mm
Cutter 120 2.0 1.1 10
Perforation cutter 120 2.0 1.1 5

Accessories and Options

Accessory Description
Cutter Cuts paper, hang tags, fabric labels, plastics and flat heat shrink tubing
Perforation cutter Cuts tear-off perforations in continuous materials
Stacking cutter Cuts and stacks printed labels; maximum stack height 100 mm
External label rewinder Built-in power supply; collects outward or inward wound rolls
Print roller series Selected by label width; heat shrink tubing requires a dedicated roller
Roll adapter For label rolls with a core diameter up to 100 mm
SD memory card / USB drive Expanded storage and data exchange
USB wireless adapter 2.4 GHz 802.11b/g/n, hotspot or station mode
USB wireless adapter (with rotatable antenna) 2.4 GHz 802.11b/g/n + 5 GHz 802.11a/n/ac
USB Bluetooth adapter Short-range wireless connection
Digital I/O interface Starts the labeling process via PLC, sensor or manual switch
I/O connector SUB-D type, 25-pin

Accessories are inserted or screwed into the barcode printer by the customer. Options are parts or assemblies added for special purposes or installed as alternatives to standard parts. If an option is pre-installed at the factory, “.250” is added to the part number; options shipped separately have “.001” appended to the part number.

Software and System Functions

Label Editing Software

The bundled label editing software fully exploits the potential of the device, most importantly for label design. Through its modular design, the software can be modified in detail as required; plug-ins such as JScript-Viewer are embedded to support functions such as the native JScript language, and the design interface and JScript command set are synchronized with real time. The software can also integrate special functions such as database connectors or barcode scanners.

Monitoring and Network Configuration

The HTTP and FTP servers built into the barcode printer allow the printer to be monitored and configured, the firmware to be updated and the memory card to be managed using ordinary programs such as a web browser or an FTP client. SNMP and SMTP clients send status, warning and error messages to the administrator or user computer by email and SNMP packets; the time server synchronizes time and date.

Programming and Peripheral Integration

The device has a built-in JScript programming language for controlling the barcode printer. In addition to JScript, the abc Basic compiler, as integrated programming software, lets the printer perform an additional file-programming step before transmitting a print job, and can also receive files from other systems such as scales, barcode scanners or PLCs, facilitating the integration of peripheral devices.

Standalone Operation Mode

Label templates, text files, graphics files and database content can be stored on a memory card, USB drive or internal flash memory. Label formats can be created with the label editing software or written directly on a PC with a text editor. Only variable data is sent to the barcode printer via keyboard, barcode scanner, scale or other host, and data can also be retrieved from the host via the database connector for printing, so label printing is completed without a connected host.

Drivers and System Status

Drivers are available so that the barcode printer can be controlled by software other than the bundled one. The system supports automatic print head detection at power-on, display of information, print tests and analysis, and provides grid print test, font information, label data, external peripheral information and an event list; the advanced system status report provides print system settings such as total print length and total operating hours, allows the printer status to be queried via software commands, and displays messages such as network errors, connection failures, barcode errors and peripheral connection errors on screen.

Built-in Fonts

  • 5 bitmap fonts:
  • 12 x 12 dot
  • 16 x 16 dot
  • 16 x 32 dot
  • OCR-A
  • OCR-B
  • 7 vector fonts:
  • AR Heiti Medium GB-Mono
  • CG Triumvirate Condensed Bold
  • Garuda
  • HanWangHeiLight
  • Monospace 821

Application Areas

Electronics Manufacturing

Applied to:

  • Cable and wire harness marking
  • Electronic component traceability labels
  • Product nameplates and barcode labels
  • Wire marking and heat shrink tubing printing

Logistics and Warehousing

Applied to:

  • Double-sided logistics labels
  • Inbound/outbound barcode labels
  • Cargo traceability and sorting marking

Textile and Apparel

Applied to:

  • Fabric labels and laundry labels
  • Hang tags and paper cards
  • Garment wash-care marking

Industry and Automotive

Applied to:

  • Automotive part traceability marking
  • Industrial equipment nameplates and cable management
  • Double-sided wire marking

Key Selling Points

One-pass double-sided printing industrial barcode printer

The double-sided barcode printer, with its two independent print heads, delivers:

  • One-pass front and back double-sided printing
  • Two independently temperature-adjustable print heads for stable print quality
  • Ribbon-saving device that lowers consumable costs
  • Backfeed-free continuous printing without cutting interruption
  • Supports heat shrink tubing, fabric labels, hang tags and other materials
  • Choice of 300 dpi / 600 dpi dual resolution
  • Suitable for diverse scenarios in electronics, logistics, textiles and automotive

Tell us your label size, material and whether you need heat-shrink tubing or fabric labels, and we will confirm the print roller and cutter setup for your line.

Get a Quote

Specifications on this page are transcribed from the product introduction supplied for this printer.

Contact Us

For general inquiries, please fill out the form below and we will have someone from our team contact you as soon as possible.