Home » Barcode & RFID Data Capture Devices » Handheld RFID Reader
Handheld RFID Reader
This is an upgraded all-in-one high-performance UHF RFID Reader. It has integrated a self-developed Impinj E Series chips based UHF module which offers industry-leading UHF performance. It adopts an integrated design, provides more stable UHF performance, and delivers higher durability. The superior system configuration of the mobile computer features the Android 11 / 13 platform, octa-core processor, optional mass internal memory and a large capacity removable battery. It also supports 2D scanning, NFC, fingerprint recognition and other functions, which enables it to be widely used in scenarios like banking, public security, warehousing, retail, logistics and other industries.
- Device typeHandheld UHF RFID reader
- UHF engineSelf-developed Impinj E Series chip module; Impinj Gen2X, EPCglobal Gen 2 (ISO18000-6C)
- Read range30 m (Impinj MR6), 32 m (Impinj M750), 33 m (Alien H3 Anti-Metal)
- Read rate1300+ tags / sec (circular polarized)
- PlatformAndroid 11/13, octa-core 2.3 GHz; 4 GB + 128 GB or 4 GB + 64 GB
- Battery7000 mAh removable pistol battery; built-in 100 mAh backup, hot swap
What the Handheld RFID Reader is
The reader is an all-in-one handheld UHF terminal that carries its own UHF module, mobile computer and battery in one housing, so tags can be read while walking a site instead of from a fixed station.
It runs the Android 11/13 platform on an octa-core processor, supports 2D scanning, NFC and fingerprint recognition, and is intended for banking, public security, warehousing, retail and logistics operations.
Key features
The UHF module is based on a self-developed Impinj E Series chips platform, which the specification sheet describes as offering industry-leading UHF performance.
An integrated design provides more stable UHF performance and delivers higher durability.
The mobile computer runs Android 11/13 on an octa-core 2.3 GHz processor, with 4 GB + 128 GB or 4 GB + 64 GB (optional) memory and support for up to a 256 GB Micro SD (TF) card.
Up to 30 m on an Impinj MR6 tag and 1300+ tags per second when circular polarized, so a room or a pallet can be counted without walking it.
The reader also supports 2D scanning (optional CM60 or Zebra SE4710), NFC at 13.56 MHz and optional fingerprint recognition with a TLK1NC02 module.
IP65 sealing, multiple 1.5 m drops to concrete across the operating temperature range, 1000 tumbles at 0.5 m, and a 7000 mAh removable pistol battery with hot swap.
Full specifications
| Performance characteristics | |
|---|---|
| CPU | Octa-core, 2.3 GHz |
| RAM + ROM | 4 GB + 128 GB / 4 GB + 64 GB (optional) |
| Expansion | Supports up to 256 GB Micro SD (TF) card |
| Operating system | Android 11/13 |
| Communication | |
|---|---|
| WLAN | 802.11 a / b / g / n / ac, 2.4G / 5G dual-band |
| WWAN | 2G: GSM (B2 / B3 / B5 / B8); 3G: WCDMA (B1 / B2 / B4 / B5 / B8), CDMA2000 ECDO: BC0; 4G: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B12 / B17 / B20 / B28A / B28B / B38 / B39 / B40 / B41 |
| Bluetooth | 5.0 |
| Vo-LTE | Support |
| GNSS | GPS / AGPS, GLONASS, BeiDou, Galileo |
| Physical characteristics | |
|---|---|
| Dimensions | 178.8 × 96.5 × 128.4 mm / 7.03 × 3.80 × 5.06 in |
| Weight | 626 g / 22.08 oz. (device with battery) |
| Display | 5-inch (fingerprint), 1280 × 720 / 6-inch, 2160 × 1080 |
| Touch panel | Multi-touch panel, gloves and wet hands supported; Corning Gorilla Glass |
| Battery | 7000 mAh / 134000 mAh removable pistol battery; built-in 100 mAh backup battery, supporting battery hot swap |
| Card slot | 2 slots for PSAM card (optional); 1 slot for Nano SIM card, 1 slot for Nano SIM or TF card |
| Interfaces | USB 2.0 Type-C, OTG, Type-C headphones supported |
| Audio | 1 microphone; 1 speaker; 1 receiver |
| Notification | Sound, LED indicator, vibrator |
| Keypad | 1 power key, 2 scan keys, 1 user-defined key, 2 volume keys (+/-) |
| Sensor | Gravity sensor, proximity sensor, light sensor, geomagnetic sensor (optional), gyroscope (optional) |
| Developing environment | |
|---|---|
| SDK | Software Development Kit |
| Language | Java |
| Tool | Eclipse / Android Studio |
| User environment | |
|---|---|
| Operating temp. | −20 °C to 50 °C / 4 °F to 122 °F |
| Storage temp. | −40 °C to 70 °C / −40 °F to 158 °F |
| Humidity | 5%RH to 95%RH (non condensing) |
| Drop specification | Multiple 1.5 m / 4.9 ft. drops to the concrete across the operating temperature range |
| Tumble specification | 1000 × 0.5 m / 1.64 ft. falls at room temperature |
| Sealing | IP65 per IEC sealing specifications |
| ESD | ±15 KV air discharge, ±8 KV conductive discharge |
| Data collection – camera | |
|---|---|
| Front camera | 5 MP |
| Rear camera | Rear 13 MP autofocus with flash |
| UHF RFID | |
|---|---|
| Impinj Gen2X | Supported |
| Protocol | EPCglobal Gen 2 (ISO18000-6C) |
| Frequency | 865-868 MHz / 920-925 MHz / 902-928 MHz |
| Engine | Based on Impinj E Series chips |
| Output power | 1 W (30 dBm, +5 dBm to +30 dBm adjustable); 2 W optional (33 dBm, for Latin America, etc.) |
| Max read range | 30 m (Impinj MR6 tag, size 70 × 15 mm); 32 m (Impinj M750 tag, size 70 × 15 mm); 33 m (Alien H3 Anti-Metal tag, size 130 × 42 mm) |
| Fastest read rate | 1300+ tags / sec (circular polarized) |
| Note | Ranges and rates depend on tags and environment |
| Fingerprint (optional) | |
|---|---|
| Fingerprint | TLK1NC02 |
| NFC (optional) | |
|---|---|
| Frequency | 13.56 MHz |
| Protocol | ISO14443A / B, ISO15693, NFC-IP1, NFC-IP2 etc. |
| Chips | M1 card (S50, S70), CPU card, NFC tags etc. |
| Range | 2-4 cm |
| Barcode scanning (optional) | |
|---|---|
| 2D scanner | CM60; Zebra: SE4710 |
| 1D symbologies | UPC / EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS etc. |
| 2D symbologies | PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX) etc. |
| Accessories | |
|---|---|
| In the box | USB cable, adapter, charging cradle for device (optional), charging cradle for pistol battery (optional), etc. |
| Note | Please check details in the accessories guide |
Where it is used
It also supports 2D scanning, NFC, fingerprint recognition and other functions, which enables it to be widely used in scenarios like banking, public security, warehousing, retail, logistics and other industries.
- Banking and finance
- Public security
- Warehousing and inventory
- Retail operations
- Logistics and distribution
Frequently asked questions
What UHF module does it use?
The UHF module is based on Impinj E Series chips and supports Impinj Gen2X, with the protocol EPCglobal Gen 2 (ISO18000-6C) and a frequency range of 865-868 MHz, 920-925 MHz or 902-928 MHz.
How far can it read a tag?
Up to 30 m on an Impinj MR6 tag (70 × 15 mm), 32 m on an Impinj M750 tag (70 × 15 mm) and 33 m on an Alien H3 Anti-Metal tag (130 × 42 mm). Ranges and rates depend on tags and environment.
Which operating system and processor does it run?
Android 11/13 on an octa-core 2.3 GHz processor, with 4 GB + 128 GB or 4 GB + 64 GB (optional) memory and support for up to a 256 GB Micro SD (TF) card.
Can it also read barcodes and NFC?
Yes. 2D scanning is optional (CM60; Zebra: SE4710), NFC is optional at 13.56 MHz (ISO14443A / B, ISO15693, NFC-IP1, NFC-IP2) with a 2-4 cm range, and fingerprint recognition is optional (TLK1NC02).
How rugged is it for daily field use?
Sealing is IP65 per IEC sealing specifications, with multiple 1.5 m / 4.9 ft. drops to concrete across the operating temperature range, 1000 × 0.5 m / 1.64 ft. falls at room temperature, and ESD of ±15 KV air discharge and ±8 KV conductive discharge.
Reading tags across a site, or counting stock? Tell us what you need to inventory, how often and where the work happens, and we will confirm the configuration, accessories and quantity that fit.
Specifications are the figures published in the Handheld RFID Reader product specification sheet (update date 2026-08-06) and are subject to change without prior notice. Accessories listed as optional are not part of the standard configuration.